1911 Forums : 1911Talk banner
1 - 6 of 6 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Is this a standard 1911 part or is this proprietary on the Spartan? It looks like a standard 1911 part. The reason I ask is, I want to replace it with a metal one.

Thanks for your time,
Dave
 

·
I need a vacation
Joined
·
1,301 Posts
Should be a standard part, I don't believe the Spartan has any kind of goofy internal lock deals. Any MSH ought to drop right in.
 

·
Premium Member
Joined
·
751 Posts
It is a standard MSH so go right ahead. That doesnt mean it wont need fitting as with anything you put on a 1911.
 

·
Banned
Joined
·
1,461 Posts
Take it out and try another one if it is a standard M/H most all will fit without a problem.
Just keep your thumb over the Cap the strut lays on when you pull out the pin or you will shoot your eye out lol.
 

·
Registered
Joined
·
7 Posts
The Spartan takes a standard MS housing but the frame and holes are just such that there is a 1-2/10000 of an overhang. Found this out going to a 1 piece SA magwell/MS housing. Wish I would have purchased a 2 piece unit so it could be fitted.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top